Follow

InfiniGuard commands allow users to see system, task, and service information, and to activate a failover procedure of DDE App A or DDE App B to the DDE App Standby.


infiniguard.info

ROLE: All Roles

Description

Display general InfiniGuard system information.

Syntaxinfiniguard.info
Example

infiniguard.info

Name
Model
Serial Number
Infiniguard Version
Available Flash Cache
DDE Node 1 Running
DDE Node 2 Running
DDE Node 3 Running
Infinisafe Status
Total Capacity
DDE A Capacity
DDE B Capacity
Infinisafe Capacity
Disk Encryption
SSD Cache Drives
BBU Charge Percent
Node BBU Protection
Inactive Drives
Rebuild 1 In Progress
Rebuild 2 In Progress
Tasks In Progress

ibox3473
B4306
3473
3.7.0.100
28.81 TB
DDE App A
DDE App B
Standing by, ready for failover
Enabled
1033.37 TB
308.39 TB
308.39 TB
405.53 TB
no
15
BBU 1: 100%, BBU 2: 100%, BBU 3: 100%
Node 1: protected, Node 2: protected, Node 3: protected
1
no
no
Detach DDE snapshot 53834 from DDE App Standby



infiniguard.failover

ROLE: Admin 

Description

Initiate DDE App failover.

Activate this procedure if there is a hardware failure that prevents a DDE App from running correctly. During the failover operation, both the failover DDE App and the DDE App Standby become unavailable.

Syntaxinfiniguard.failover ddeapp=DDEAPP
Argumentsddeapp

Name of the DDE App that must failover to the DDE App Standby.
Possible values are a or b.

Exampleinfiniguard.failover ddeapp=b

Failover is a long operation during which both DDE nodes become unavailable.
Are you sure? [y/n]
Failover of DDE App B. To monitor the progress run command "infiniguard.task.query"



infiniguard.task.query 

ROLE: All Roles

Description

Display task information.

Syntaxinfiniguard.task.query [task=TASK]
Argumentstask

Internal ID of an existing task.
Note: The first character of the task ID is the node of the controller that oversees the task's status, not the node on which the task is run.

Exampleinfiniguard.task.query task=b1

ID  TYPE             START                STATUS   PROGRESS  TIME LIMIT
A1  Snapshot Attach  2022-05-18 10:37:34  success  100%      21 min
A2  Snapshot Detach  2022-05-18 10:51:24  running  58%       10 min
B1  Snapshot Attach  2022-05-09 13:27:58  success  100%      21 min
B2  Snapshot Detach  2022-05-12 18:21:21  success  100%      10 min



infiniguard.health.query

ROLE: All Roles

Description

Display the health status of services.

Syntaxinfiniguard.health.query
Exampleinfiniguard.health.query

Service Status   OK
Core             Active
Deduplication    Active
Management       Active



Was this article helpful?
0 out of 0 found this helpful

0 out of 0 found this helpful

Last edited: 2022-08-06 08:35:46 UTC

Comments