Follow

System configuration commands set the InfiniBox DNS, Management IP and name.


config.system.query 

ROLE: All Roles

Description

Display general system configuration. 

Syntaxconfig.system.query 
Exampleconfig.system.query
Name                      ibox505
Management IP             172.16.65.75 / 255.255.224.0
Address
Default Gateway           172.16.95.254
SSL Redirection           enabled
Active Session Timeout    1440 Minutes
Idle Session Timeout      60 Minutes
Node 1 IP Address         172.16.67.35
NTP Servers               ntp01.infinidat.com
Message Of The Day        Infinidat’s enterprise storage 
                          solutions offer the performance,
                          flexibility and reliability that
                          are necessary to support today’s data
                          intensive enterprises.



config.system.set_auto_udid_range 

ROLE: Admin 

Description

Enables / disables default pool ssd cache.

Syntaxconfig.system.set_auto_udid_range [start={1..32767}] [end={1..32767}] disabled=[YES|NO|Y|N] 
ArgumentsstartAn integer number between 1 and 32767 (inclusive)
endAn integer number between 1 and 32767 (inclusive)
disabled Either yes or no 
Exampleconfig.system.set_auto_idid_range start=1 end=32767 disabled-NO 



config.system.set_default_pool_compression 

ROLE: Admin 

Description

Enables / disables default pool compression.

  • This command sets the system default to allow pools to use compression for all of their datasets
  • This system-level setting can be overridden per pool, using the pool.set_compression command
  • This system-level setting can be overridden per dataset, using the following commands:
    • vol.set_compression
    • fs.set_compression
Syntaxconfig.system.set_default_pool_compression compression=YESNO 
Argumentscompression   Either yes or no 
Example
config.system.set_default_pool_compression compression=yes 
Default pool compression set to "enabled" 



config.system.set_default_pool_ssd_cache 

ROLE: Admin 

Description

Enables / disables default pool SSD cache

  • This command sets the system default to allow pools to use SSD cache for all of their datasets
  • This system-level setting can be overridden per pool, using the pool.cache command
  • This system-level setting can be overridden per dataset, using the following commands:
    • vol.cache
    • vol.snap.cache
    • fs.cache
    • fs.snap.cache 
Syntaxconfig.system.set_default_pool_ssd_cache ssd_cache=YESNO 
Argumentsssd_cache   Either yes or no 
Example
config.system.set_default_pool_ssd_cache ssd_cache=yes 
Default pool ssd cache set to "enabled" 



config.system.set_dns 

ROLE: Admin 

Description

Set DNS server IPs. 

Syntaxconfig.system.set_dns primary=IPADDRESS [secondary=IPADDRESS]  
ArgumentssecondaryA valid IPv4 address 
primaryA valid IPv4 address
Exampleconfig.system.set_dns primary=192.168.8.21 
DNS server set to 192.168.8.21 



config.system.set_fqdn 

ROLE: Admin 

Description

Sets the system's FQDN, as defined in the DNS. 

Syntaxconfig.system.set_fqdn fqdn=STR  
Argumentsfqdn Any sequence of characters 



config.system.set_motd  

ROLE: Admin 

Description

Set the message of the day

  • The message is visible via config.system.query
Syntaxconfig.system.set_motd [clear=YESNO] 
Argumentsclear   Either yes or no 

  • Run the command.
  • When prompted, enter the message text. Then, type Ctrl+D to save the message.
Example
config.system.set_motd 
Message of the day set to "sequence of characters" 



config.system.set_name 

ROLE: Admin 

Description

Set system name. 

Syntaxconfig.system.set_name name=NAME 
Argumentsname   A maximum of 65 Latin characters, numbers, spaces, and the following symbols: "^&'@()[]$=!-#{}%.+~_" (excluding quotation marks). Leading and trailing whitespace characters are stripped
Example
config.system.set_name name=box-cl002  
System renamed from box-cl001 to box-cl002  



config.system.set_session_timeout 

ROLE: Admin 

Description

Set system timeouts.

InfiniBox session timeout values are configurable as follows:

  • Idle session timeout - sets the session to expire in case of user inactivity
    • The user's credentials are kept for the timeout period. Within this period, when opening the GUI in the browser, there is no need to type the user and password.
    • By default, the session terminates after 1 hour of inactivity
  • Active session timeout - sets the session to disconnect the user
    • By default, the session expires after 24 hours 
Syntaxconfig.system.set_session_timeout [active_session=ACTIVESESSIONTIMEOUT] [idle_session=IDLESESSIONTIMEOUT] 
Argumentsidle_session Session timeout. In minutes 
active_session Session timeout. In minutes  
Exampleconfig.system.set_session_timeout active_session=2880 idle_session=1440 
Session expiry set to "2880 minutes", Session idle timeout set to "1440 minutes" 



config.system.set_ssl_redirection 

ROLE: Admin 

Description

Enables or disables the redirection from HTTP (80) to HTTPS (443). 

Syntaxconfig.system.set_ssl_redirection redirect={YES|NO|Y|N} 
ArgumentsredirectEither yes or no.
Example
config.system.set_ssl_redirection redirect=y 

Changing redirection may affect sessions currently opened between clients and the storage system.

Are you sure? [y/n] y

HTTPS redirection set to "enabled"


Was this article helpful?
0 out of 0 found this helpful

0 out of 0 found this helpful

Last edited: 2022-08-06 08:33:50 UTC

Comments