Follow

About the Touchscreen

The Touchscreen is an optional part of InfiniDoor. The Touchscreen displays information about system performance and capacity gauges. 

Installation

  • InfiniDoor Touchscreen (if supplied) is initially configured by INFINIDAT personnel, as part of the InfiniBox installation.

Authentication and security

User management

  • Any InfiniBox user can log into the Touchscreen
  • The tablet user
    • The Touchscreen is installed with a predefined local user with the following attributes:
      • Role: read-only
      • Username: tablet
      • Password: auto-generated, non-trivial and unique for each InfiniBox system
    • The tablet user can be disabled (or deleted), similar to any other local user

Controlling the visibility of the Touchscreen

The Touchscreen can be set to work in two modes:

  • Always on - the screen is never locked and the screensaver does not become active
  • Locked screen - the Touchscreen view is hidden behind a screensaver

Screen lock

When the screen is set to be locked, the user controls the lock timer and the way the screen is unlocked.

  • Lock timer - the lock timer can be set (to either 1, 2, 3, 5, or 10 minutes)
  • Screen lock - the user can unlock the screen in either of the following ways:
    • None - the screen is unlocked whenever it is touched. There is no need to enter a pattern or PIN
    • Pattern - the screen is unlocked using a pattern
    • PIN - the screen is unlocked upon typing the PIN

Instructions 

Change the display options

  1. Touch the Action menu at the top-right of the screen. The Setting menu opens.
  2. From here you can:
    1. Set the screen to be either always on or turned on when touched
    2. Set the screen to be locked. You will be instructed to create a pattern and to repeat it for verification.
    3. Set the lock timer duration

Switch user

  • Switch user - touch the username to pop-up the login screen

 

Was this article helpful?
0 out of 0 found this helpful

0 out of 0 found this helpful

Comments